Kä ye looi:
Adhesive band fatigue tester machine is used for adhesive band (magic tape) repeatedly to do stripping and fitting action, so after a certain number of times, cut the test into 55 × 20mm, then with the roller-based weight shot and press the test piece, make it uniformly fit, then with a different pull test machine, measure its adhesion (AS) adhesion strength (PA) according to standard: DIN-3415 standard requirements

Karakteristika prinsip:
Patent yam kënë ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔ The hook of the two rollers and the fur surface adhesive band are in contact with each other, and according to their width plus a certain load, the bottom roller is the power wheel, driving the load roller to rotate repeatedly, so that the fixed on the roller adhesive band continues to fit, stripped, to achieve its fatigue objective. The hook of the two rollers and the fur surface adhesive band are in contact with each other, and according to their width plus a certain load, the bottom roller is the power wheel, driving the load roller to rotate repeatedl Touch screen control, plus protective cover, safety noise reduction.

Luɔi kɛ: GB/T 3903.20、GB/T 3903.21、GB/T 23315、ISO 22777、ISO 22776、DIN 3415、SATRA TM 123

Parameters:
1.Large roller diameter: 162.5 ± 0.5mm
2. Dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr: 160.0 ± 0.5mm
3.Wheel width: 70mm (maximum sample width 50mm), load weight 5KG
4. Rotary speed: 60 ± 5 turn / min
5. Waktu ye rot waar: 30 seconds
6. Counter: Touch screen nyuɔɔth
7.Volume: 45 × 55 × 57cm