Proyek

Description

Voltage sensor

dc10v / 2.5V output current: Digital 4 wire system adjusted at 120mA voltage

Sensor input range

- 3 + 3 mV / V ~

Adjustment de gain

Ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ.

Input ye wal
Kalibrasiɔn Range

Kɛnɛya: 0.500 mV / V hangal 3 mV / V: 0.1% FS.

Nyuɔ̈th

STN LCD (320×240 point), ye nyuɔɔth: ±99999

Nyuɔ̈th item

Kɔɔr: kg, G，T， Kuen: N, KN, Nano
Pɛɛi: N/m2, Pa, kPa, MPa, bar
* "No unit" setup can be done too

A / D Converter

Speed: 24 bits (binary) 2,000 times/second (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary) (binary)

Precision

Non-linearity: 0.02% fs ± 1 digit (3 mV / V input) Zero point drift: 0.5 V / ℃ μRTI; Yield drift: 0.01% / ℃)

Filter analog

LPF (low pass filter, -6dB / month)
30 / 100 / 300 / 1000 Hz Dijital Ajuiɛɛr

Analog monitor output

Output level: about 2V per 1mV/V, input load resistance: 2KΩ or more

Interface (Built-in)

RS-232C Communication Interface [Sync, Full Duplex, Transmission Speed: 9600 bps ~ 57600]
Printer cï looi ku jɔl ya tɛ̈n yenë yen nyuɔɔth yiic [ 2-line serial interface transfer speed: 600 bps ]

Wave Profile Holding

<Track Sampling Hold>
Peak/Bottom/Peak/Average --- Range Settings
Maximum, Minimum, Turn Point

Signal output

HI/LO Compare Output (HH, Hi, OK, Look, LL) / Run Output / Keep End Output / VCE = 30V Output (Maximum), IC = 30mA (Maximum)

Signal dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r

Luɔi kuany input control input/digital zero input (DZ)/drawing control input/calibration kuany input LC = 10mA wala ka tɔ̈u

Voltage Power

~ AC100 240V (15% / 10%) 50 / 60Hz

Käke luɔɔi

Tɛmɛ: 10 ± 40 ℃ ~; Humidity: relative humidity 80% or less (no clouding)

Dimensions ye raan

99.5 (W) × 96 (h) × 138 (D) mm
Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl

Weight ye

1 kg

Proyek

Description

BCD

BCD code parallel data output interface
BCD konektor

DAV

D / A Converter
Voltage output: 10±10 V (~zero point output and full scale output can adjust the number)

Yi

D / A Converter
Output current: 20mA (4 ~ zero point output and full scale output can adjust the number)

DC Power

DC24V (±15%), pɛ̈l ye kek tɔ̈ɔ̈u: 20W maximum
Wave current (typical value): 55a, 1msec (cold start at normal temperature)

Portable Box

A dedicated portable box comes with NDIS connectors, power switches, and power cables in the back side, in case when this option needs to deliver us during the manufacture of various sensors, at the same time to our customers, we'll be happy to install calibration and set values for the ds-6200 to be coupled consistently with the sensors. A dedicated portable box comes with NDIS connectors, power switches, and power cables in the back side, in case when this option needs to deliver us during the manufacture of various sensors, at the same time to our customers, we