PT100/PT1000/Thermocouple 16-channel temperature inspection instrument (ye RS485 yök)- Fornitore globale

Grupe proizvoda

Informacije o firmi

Nivo transakcije

Član VIP
Kontakt
Telefon

18666828040
Адрес

1~3 t????r, 7 t????r, 23 t????r, Dongcheng Street, Dongguan, Guangdong

Kontakt sada

PT100/PT1000/Thermocouple 16-channel temperature inspection instrument (ye RS485 yök)

YY-F1660 multi-path inspector ee 16 channel smart temperature control instrument ye luui në teknoloji de kɔmpiöta. The instrument uses two rows digita

Допутник контакта

Još proizvoda

Detalji proizvoda

PT100/PT1000/Thermocouple 16-channel temperature inspection instrument (ye RS485 yök)

PT100/PT1000/热电偶十六通道温度巡检仪器

I. Teknoloji
1, input type: CU50 (-50.0 ~ 150.0 ℃), Pt100 (-199 ~ 600.0 ℃), Pt1000 (-199 ~ 600.0 ℃),
K (0 ~ 1300 ℃), E (0 ~ 700.0 ℃), J (0 ~ 900.0 ℃), S (0 ~ 1600 ℃)
Note ①: to user order specify input signal as 0~5V, 1~5V model to signal, the instrument will not support the above various thermocouples, thermal resistance signal input. to user order specify input signal as 0~5V, 1~5V model to signal, the instrument will not support the above various thermocouples, thermal resistance signal input. to user order specify input signal as 0~5V, 1~5V model to signal, the instrument will not support
Note ②: instrument kënë ye multi-channel instrument ye, a lëu bï sensor juëc ya tɔ̈ɔ̈u. Amma a wajib ka sensor ye cɔl isolation. A thermocouple misal: thermocouple fila
A lëu bɛ̈n ya tɔ̈ɔ̈u në metal shell. Ye tɛ̈n, ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
2, alarm relay contact capacity: 220V 3A (resistance)
3.Measurement accuracy: ±0.5F•S±1 word, additional cold end supplemental taste error ±1℃ 3.Measurement accuracy: ±0.5F•S±1 word, additional cold end supplemental taste error ±1℃
4, Power: AC220V 50Hz Power consumption: less than 5W
5, luɔɔi: 0 ~ 50 ℃, relative humidity ≤85% RH, no corrosive and no strong electromagnetic radiation occasions
6, Dimension: 160 × 80 × 130 Dimension: 152 × 76 (mm)

II. Dashboard

PT100/热电偶十六通道温度巡检仪器

Third, instrument wiring (ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan)

Lëk: 1: Printer interface cable, this instrument printing uses TTL level interface method, 'R' to printer busy line, 'T' to printer data line, GND to printer ground line, other lines do not need to be connected.

2: wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t

4. Luɔi instrument

1, tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n

① Tɛ̈n yenë yen luui thïn, ka tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈ Na yïn ye parameter tɔ̈ɔ̈u, aw bɛ parameter tɔ̈ɔ̈u tɔ̈ɔ̈u tɔ̈ɔ̈u tɔ̈ɔ̈u tɔ̈ɔ̈u tɔ̈ɔ̈u tɔ̈

② Press SET key for 3 seconds, you can enter the parameter menu, press ▼ key or▲ key, you can set any value within the specified range of parameters, long press ▼ key or▲ key can achieve quick addition or quick addition. Lɔ̈k SET key &▼ ba menu yic.

② Automatic inspection state, press▼ or▲key 3S to enter the channel fixed point or loop display setting state, press▼ or▲key to set the bottom row window value to 1~LU of a certain channel number, the meter will be stationary to show the channel measurement value, set the value to 0 or press SET key, the meter will return to loop display state.

② tɛ̈n yenë alarm bɛ̈n looi, alarm ye tɛ̈n yenë alarm ye tɛ̈n yenë alarm ye tɛ̈n yenë alarm ye tɛ̈n yenë alarm ye tɛ̈n yenë alarm ye tɛ̈n yen Na ye alarm ye tɔ̈u piny, ke lamba ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny.

= 5 /* GB3 /* MERGEFORMAT⑤Print function time parameter setting (available only with printing function): Hold the SET key & ▼ key, ▲ key three for more than 3 seconds, to enter the printing time setting state.

② Manual instant printing (ye tɔ̈ në kaam de print function): Press SET +▲ button for 3 seconds, the meter will print the data instantly once.

2, Setting of the basic parameters of the instrument. 2, Setting of the basic parameters of the instrument. 2, Setting of the basic parameters of the instrument. 2, Setting of the basic parameters of the instrument.

Serial No

Duniɛ Adres

Symbol

Nyuɔ

Setup Range

Bayan

Factory Value

Nyuɔ̈th kä piny

Channel Fixed Point Inspection Value

ByLuDizisiɔn

（0～16）

Na raan wïc ba tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen0Sa, a ye tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen

0000H

Password Lock

0~255

LK＝18Na yïn lëu ba kä ye kek gam bɛɛ ya waar

0001H

Sensor input jili

－

CU50; PT100; K； E； J;

－

0002H

Limit alarm

Skala fɛɛr

Ka tɛmɛ tɛmɛ>A1Tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n

－

0003H

Low Limit Alarm

Skala fɛɛr

Tɛmɛ tɛmɛ <A2Tɛ̈n yenë, alarm de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny

－

0004H

Nyuɔ̈thkɛ

0～1

dp=0No decimal point; wala decimal point; dp=1Nyuɔ̈th decimal point

0005H

Settings of Channel

1～LP

Users can adjust the required number of channels within the factory value. Users can adjust the required number of channels within the factory value. Users can adjust the required number of channels within the factory value. Users can adjust the required number of channels within the factory value.

－

0006H

Waktu tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n

4～120Sekond

Users setup this parameter to customize patrol interval time. Users setup this parameter to customize patrol interval time. Users setup this parameter to customize patrol interval time.

0007H

Adrɛs/Waktu print

1~9999

Na ye serial port communication function,t2<unk> nyuɔth adrɛs de kɔc kɔ̈k

Ni a tɔ̈u printing function,t2<unk> ye nyuɔɔth thaa ye looi(minit)

－

0008H

Porter Rate Komunikasi

－

1200 、2400、4800、9600(Print)Funksiɔn wala معنi）

9600

000AH

Yil diwal output

0～2

0: Wala 1: BeltRS485Funksiɔn Komunikasi

2: Kuen printing

By Klient

Demande

000BH

a1Kɔl sensor error correction

………. .

…….

001AH

C16

a16Kɔl sensor error correction

Yïn tɔ̈ɔ̈u SET key ku▼ key, ▲ key 3 key3Ka tɛmɛ seconds, ka tɛmɛ print time setting status.

125

yer

Saan

0～99

Setting a year parameter (Yɔɔdɩ yɔɔdɩ yɔɔdɩ yɔɔdɩ yɔɔdɩ yɔɔdɩ yɔɔdɩ yɔɔdɩ)

－

126

Kuen

1～12

Setup month parameters

－

127

Datum

1～31

Setup date parameters

－

128

Saat

00～23

Setting Hour Parameters (Lɛɛr Parameters)

－

129

Minit

00～59

Seta minit parameters

－

5.Lëk:

1. Sensor ye tɔ̈ɔ̈u adhil bï ya tɔ̈ɔ̈u.

2. N'a ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈

3, ye "HH" ye nyuɔɔth ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ.

4, na ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ N'a tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yenYe.

5, laam ye nyuɔɔth yen laam ye nyuɔɔth, laam ye nyuɔɔth ALM2 ye nyuɔɔth, laam ye nyuɔɔth ye nyuɔɔth.

6, tïŋ parameters ka lëu waar, tïŋ 'LC' ye 18.

PT100/PT1000/Thermocouple 16 Channel Temperature Inspection Instrument, PT100/PT1000 Temperature Sensor, PT100 Sensitive Temperature Probe, PT100 Platinum Thermal Resistance from Ohong Technology http://www.dgahkj.cn/

Онлайн разпит

Kontakti
Kompanija
Telefon
E-mail
WeChat
Kod provjere
Сједност поруки