

GTBZ46Z/GTBZ56ZSelf-driving straight arm high-altitude work platform
Serial No |
Proyek |
GTBZ46Z |
GTBZ56Z |
|
1 |
Maximum luɔi height |
48m |
58.3m |
|
2 |
Platform ye dɔŋ |
46m |
56.3m |
|
3 |
A maximum height when collecting (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height when collecting) (A maximum height) |
3.1m |
3.089m |
|
4 |
Maximum radius de luɔi |
23.4m |
24.4m |
|
5 |
Dɛɛr (tɛ̈n yenë kɛ̈ɛ̈k ye tɔ̈ɔ̈u/tɛ̈n yenë kɛ̈ɛ̈k ye tɔ̈ɔ̈u) |
2.8m/4.2m |
2.49m/5.03m |
|
6 |
Length ye tɔ̈ɔ̈u |
13.266m |
14.572m |
|
7 |
Capacity of Carrying (Limited/Non-Limited) |
480kg/230kg |
480kg/230kg |
|
8 |
Axle distance |
4.2m |
5.6m |
|
9 |
Radius de rotation de wheel |
4.13m |
4.13m |
|
10 |
Radius de rotation de roues extérieures |
7.02m |
5.43m |
|
11 |
Rotational Table (Rotational Table) |
360Degree kontinu |
360Degree kontinu |
|
12 |
Turntable rotation speed |
0~ 1/3rpm |
0~ 1/3rpm |
|
13 |
Platform size (length × width × height) |
2.44× 0.91 × 1.13m |
2.44× 0.91 × 1.13m |
|
14 |
Platform Layout |
Automatic flattening |
Automatic flattening |
|
15 |
Platform Rotation |
±80° |
±80° |
|
16 |
Main arm segments |
5Festival |
5Festival |
|
17 |
Angle de variation de main arm |
-10°~+75° |
-10°~+75° |
|
18 |
Hydraulic pressure ye dɔɔni |
21MPa |
21MPa |
|
19 |
Sistɛm Voltage |
12V |
12V |
|
20 |
Specifications de tire |
445/50D710Tire solid |
445/50D710Tire solid |
|
21 |
Dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r |
430mm |
430mm |
|
22 |
Kapasitet tank fuel |
151 L |
200L |
|
23 |
Kɛnɛya |
22100kg |
22100kg |
|
24 |
Speed ye cath |
Status dɔ |
4.4 km/h |
4.4 km/h |
25 |
Lift wala extend status |
1.1km/h |
1.1km/h |
|
26 |
Sisitɛm ye cath ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ |
25MPa |
25MPa |
|
27 |
Maximum climb slope |
40% |
40% |
|
28 |
Drive steering jili |
4×4×4 |
4×4×4 |
|
29 |
Motor |
Deutz |
Cummins |
|
30 |
Engine rated power |
74.4kw/2200rpm |
74.4kw/2200rpm |
|
31 |
Luɔr bayanna |
Red + yellow |
Red + yellow |
|
Ajuiɛɛr
Serial No |
Bɛ̈ɛ̈i/Bɛ̈ɛ̈i yɔɔdɔ |
Manufacturers of accessories |
Serial No |
Bɛ̈ɛ̈i/Bɛ̈ɛ̈i yɔɔdɔ |
Manufacturers of accessories |
1 |
Kuen Reducer |
Brevini, Itali/PMP |
16 |
Filter air |
DonaldsonDonaldson |
2 |
Pump minyak gear |
SALAMI, Itali |
17 |
Silinder minyak |
Sichuan Chengdu |
3 |
Valve hydraulic ye |
Amerika Hydraforce Itali Oil-control |
18 |
Silinder kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k ye kɔ̈k |
Hunan Changsha |
4 |
Kɔntrol |
Finland EPEC/Beijing KAIS |
19 |
Center Rotary Connector |
Hunan Changsha |
5 |
Pump ye waar |
Amerika SAUER |
20 |
Tank Fuel |
Zhejiang Jiashan |
6 |
Sensor dɔ |
BPE Caama |
21 |
Steel ring assembly |
Zhejiang Fuyang |
7 |
Power Unit |
Bücher, Amerika |
22 |
Silencer |
Shanghai |
8 |
Rotary Reducer |
Taian Art Group |
23 |
Rope steel ye cɔl |
Hunan Changde |
9 |
Motor |
Japan YANMAR |
24 |
Weight, axis seat, etc. castings |
Hunan Changsha |
10 |
Links |
KTR Caama |
25 |
Drag chain |
Hebei Cangzhou |
11 |
Elektrik gas valve actuator |
SUMJACK Amerika |
26 |
Bateri |
Windsail |
12 |
Rotate Motor |
Amerika DANFOSS |
27 |
Oil cooler |
Foshan, Guangdong |
13 |
Motor jäl |
Amerika SAUER |
28 |
Tire |
Qingdao Yi Lion Mai |
14 |
Motɛr Swing |
Amerika HELAC |
29 |
Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ Döŋ |
Anhui Ma'anshan |
15 |
Kontrol Handle |
Amerika DANFOSS |
30 |
Glass Steel Cover |
Hunan Changsha |
Teknoloji
1.A lëu bï ya luui në ɣän kɔ̈k peei yiic, man ye yen lëu bï ya luui në ɣän kɔ̈k peei yiic, ɣän kɔ̈k peei yiic, ɣän kɔ̈k peei yiic, ɣän kɔ̈k peei yiic.
2.Arm yeKɛlTɛ̈n yenë yen tɔ̈u thïn, a tɛ̈n yenë yen tɔ̈u thïn, a tɛ̈n yenë yen tɔ̈u thïn;A tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ.
3.A naŋ console(Ground console ku platform console) ku up-down console luɔɔi switch switch. Lɔ̈k console piny tɛ̈n ye luɔ̈ɔ̈i në upper control.
4.Kä ye kek tɔ̈ɔ̈u piny de diesel engine oil temperature, oil pressure, water temperature etc.
5.A tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n
6.Arm extending, variable, rotating run smoothly, and has a buffer device. Arm extending, variable, rotating run smoothly, and has a buffer device. Arm extending, variable, rotating run smoothly, and has a buffer device.
7.Lɔ̈ɔ̈m de arm, ye waar, ye rot, ku ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot
8.Lɔ̈ɔ̈m de platform ku lɔ̈ɔ̈m de arm ye lɔ̈ɔ̈m de brake ye kɔc gam, ye kɔc gam ye kɔc gam ye kɔc gam ye kɔc gam ye kɔc gam ye kɔc gam ye kɔc gam. Lɔ̈ɔ̈m de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot de rot.
9.Na ye tɛ̈n yenë yen cath, na ye tɛ̈n yenë yen cath, ka tɛ̈n yenë yen cath, ka tɛ̈n yenë yen cath, ka tɛ̈n yenë yen cath, ka tɛ̈n yenë yen cath.
10.N'a tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈nTɛ̈n ye mɛtɛr 1.2 ka tɔ̈ nhial, ka tɛ̈n ye tɛ̈n ye tɛ̈n ye tɔ̈ nhial.
11.Lɔ̈ɔ̈ŋ, waar, lɔ̈ɔ̈ŋ, ku jäl në ɣän juëc alëu bï luɔɔi juëc looi në kaam tök.
12.Work bucket has automatic leveling function, work bucket relative horizontal surface tilt angle cannot be greater than1.5° ye.
13.Konsol ye tɔ̈u nhial ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye tɔ̈u piny ye t
14.A dhil tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u.
15.Yïn24V auxiliary power device, to motor or main oil pump fails, can make the work bucket safe to the ground.
16.A tɔŋ force torque limiter, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi, ka baara ye kɔc looi.
17.Digital dual sensor detection circuit ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ Na tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye
18.Tɛ̈ɛ̈r ye tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen tɔ̈u yen. A dhil tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u ka tɔ̈u. N'a tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈
19.With automatic speed and alarm, cutting function: when the working amplitude reaches or exceeds the corresponding permissible amplitude. With automatic speed and alarm, cutting function: when the working amplitude reaches or exceeds the corresponding permissible amplitude.Në 80%, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka t Ni tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈
20.Motor gasport control adhil bï ya tɔ̈u në kaam kadiäk yiic, të cenë yen luui në kaam juëc yiic, motor abï ya tɔ̈u në kaam de tɔ̈u në kaam de tɔ̈u në kaam de tɔ̈u në kaam de tɔ̈u në kaam de tɔ̈
21.Ni masin ye tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈uNa yɔ̈ɔ̈r de 5°, a bɛ̈n ya cɔk tɛ̈n yenë a tɔ̈ɔ̈u thïn.
22.Na cï masin ye cath ku lɔ̈ɔ̈m, a bï alarm ya looi.
23.LuɔiPLC ku CAN bus control method, line simplified, maintenance and repair is easy. PLC ku CAN bus control method, line simplified, maintenance and repair is easy. PLC ku CAN bus control method, line simplified, maintenance and repair is easy. Lɔ̈ɔ̈m ye cɔl metal air protection plug, ka gël ye IP65.
24.Engine air inlet system uses closed-type double-stage filtration, adapting to multi-dust environment operation. Engine air inlet system uses closed-type double-stage filtration, adapting to multi-dust environment operation. Engine air inlet system uses closed-type double-stage filtration, adapting to multi-dust environment operation.;Ku tɛ̈n yenë kek tɔ̈ɔ̈u aye thiin koor.
25.Kä ye kek tɔ̈ɔ̈u nhial ku piny de console aye kek gël.
26.A ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen, a ye tɔ̈u yen.
27.Pump ye hydraulic ye tɔ̈u në automatic pressure compensation ku load induction function, ye tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen
28.A tɔŋ awtomatik stop device ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye
29.Lɔ̈k valves de gël në hydraulic circuits ago gël de pɛ̈l ye juak në hydraulic components.
30.Silinder bɛ̈ɛ̈i tɔ̈u thïn ka bɛ̈ɛ̈i ka bɛ̈ɛ̈i ka bɛ̈ɛ̈i ka bɛ̈ɛ̈i ka bɛ̈ɛ̈i ka bɛ̈ɛ̈i ka bɛ̈ɛ̈
31.Hydraulic components and control components are imported brand products, high reliability. Hydraulic components and control components are imported brand products, high reliability. Hydraulic components and control components are imported brand products, high reliability.
32.A ye tɛmɛ teknoloji patente ye tɛmɛ, a ye tɛmɛ ye aluminiyum ye tɛmɛ, a ye tɛmɛ ye plastik ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye tɛmɛ ye
33.A ye tɔ̈u piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny de piny
34.A kɔrɔ cɛɛk, a tɔŋ cɛɛk.
Garanti
1. Garanti de masin bɛ̈ɛ̈i 12 bɛ̈ɛ̈i (cïn kä ye kek looi)
2. Garanti ye looi në 5 yiic
3, ye motɛr ku masin bɛɛ ya tɔ̈ɔ̈u në luɔɔi fɔlɔ (cïn kä ye kek tɔ̈ɔ̈u)
