
◎BZC300CDF6× 4IIIKɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl Dongfeng 6× 4 dedicated drill rig chassis, model number is DFS1251GL18, emission standard country three, using 11.00R20 steel wire off-road pattern tires, off-road quality.
◎Kä ye kek looi në ɣän kɔ̈k yiic, ye kek looi në ɣän kɔ̈k yiic, YC6J180-33Motor diesel, bɛ̈ɛ̈i diɔ̈ɔ̈r ye bɛ̈ɛ̈i diɔ̈ɔ̈r ye bɛ̈ɛ̈i diɔ̈ɔ̈r ye bɛ̈ɛ̈i diɔ̈ɔ̈r ye b
◎The drilling machine uses independent diesel engine as a power when drilling in, through mechanical transmission to make mechanical rolling and turning disk work at the same time. The drilling machine uses independent diesel engine as a power, through mechanical transmission to make mechanical rolling and turning disk work at the same time.
◎Drilling machine equipped with mechanical double coil lift unit, main deputy hydraulic coil lift has a large lifting force, lifting speed fast characteristics, can satisfy normal drilling needs, and have the ability to handle general well inside accidents. Drilling machine equipped with mechanical double coil lift unit, main deputy hydraulic coil lift has a large lifting force, lifting speed fast characteristics, can satisfy normal drilling needs, and have the ability to handle general well inside accidentsYe.
◎Hydraulic oil cylinder controls well hole cardboard forward and backward, making insurance cardboard closed, to achieve holding or releasing drill rod joints. Hydraulic oil cylinder controls well hole cardboard forward and backward, making insurance cardboard closed, to achieve holding or releasing drill rod joints.
◎Pneumatic Integrated Design, Pneumatic Remote Control BW850/2APump ye cɔl mud clutch, automation ye dɔɔni, ku baara ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye.
◎Drilling Machine 4Hydraulic leg dɔɔni, mechanical leg fila. Hydraulic leg cylinder piston rod bɛ̈ɛ̈i ye kek tɔ̈ɔ̈u ke ye kek tɔ̈ɔ̈u ke ye kek tɔ̈ɔ̈u ke ye kek tɔ̈ɔ̈u ke ye kek tɔ̈ɔ̈u. Kɔnɔ, cɔl tɛ silindir dɔ bɛ̈n tɔ̈ɔ̈u, chassis dɔ̈ŋ ka tɔ̈ɔ̈u.
◎Rotary disk ye dial type, ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rotDɛ̈t.
◎30KwGenerator, tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈nA kɛ̈ɛ̈k bɛ̈n kɛ̈ɛ̈k bɛ̈n kɛ̈ɛ̈k bɛ̈n kɛ̈ɛ̈k bɛ̈n kɛ̈ɛ̈k bɛ̈n kɛ
◎Hydraulic system adopts a open system, up and down vehicle manipulation separated, avoiding incorrect operation. Hydraulic system adopts a open system, up and down vehicle manipulation separated, avoiding incorrect operation. Hydraulic system adopts a open system, up and down vehicle manipulation separated, avoiding incorrect operation. A ye tɔ̈ɔ̈u në winter oil heater, summer oil heater,Walisa ka kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r
◎This drilling machine is equipped with a auxiliary removal rod oil cylinder, use this oil cylinder to push the turning disc thorny teeth, remove the drilling rod connector first button, then use the turning disc to reverse the removal rod, to prevent impact damage to the drilling gearbox when removing the rod.
|
Parameters teknis
|
|
Nominal drilling depth ((M))
|
300
|
|
Diameter ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot
|
500
|
|
Rotational disk speed ((r/min))
|
47;71; 107
|
|
Rotational torque ((kN.m))
|
7.1; 4.7; 3.1
|
|
Lɔ̈ɔ̈i ye cɔl single rope pull (kN)
|
30
|
|
Kapasitet dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r (kN)
|
240
|
|
Lɔ̈ɔ̈i ye dɔ̈ŋ ye dɔ̈ŋ ye dɔ̈ŋ ye dɔ̈ŋ ye dɔ̈ŋ ye dɔ̈ŋ ye dɔ̈ŋ (kN)
|
30
|
|
Lɔ̈ɔ̈i ye kɔ̈k (kN)
|
120
|
|
Capacity of drilling tower (kN)
|
240
|
|
Height of drilling tower ((mm))
|
11900
|
|
Bɛ̈ɛ̈r (mm)
|
108×108×7500
|
|
Dɛɛr dɛɛr (mm)
|
¢88.9×9.8×5500
|
|
Power
|
Motor diesel model
|
Dongfeng Cummins 6BTA5.9-C130
Turbo ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom
|
|
Puwol nominal
|
97kW
|
|
Rated speed
|
2200rpm
|
|
Maksimum output torque
|
560Nm/1500rpm
|
|
Pump ye kɔl
|
Model
|
BW850/20
|
|
Silinder diameter (mm)
|
150
|
|
Lɔ̈ɔ̈i (L/min)
|
850, 600
|
|
Pump pressure (MPa)
|
2, 3
|
|
Puɔ̈ɔ̈l (kW)
|
40
|
|
Chassis mota
|
Model Chassis
|
DFS1251GL18
|
|
Formu Chassis
|
6×4
|
|
Motor
|
Model
|
YC6J180-33
|
|
Tip
|
Pii ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom
|
|
Puɔth (kW)
|
132
|
|
Rated rotation speed (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm) (rpm)
|
2500
|
|
Luɔi (mm)
|
10500×2480×13700
|
|
Lɔ̈ɔ̈i (mm)
|
12500×2480×3700
|