◆ Video Interface
Video bandwidth: 5Hz ~ 10MHz
Signal level: 1Vp-p ((typical value)
Sample Frequency: 16.4M
Signal impedance: 75Ω
Signal Interface: BNC ((PAL, NTSC, SECAM)
Diferential gain (DG): <1.3% (kɛnɛya)
Diferential Phase (DP): <1.3° (ye yic)
Signal noise ratio (SNR): > 63 dB ((weighted)
◆ Ether UPT interface
Speed: 10/100/1000M, full duplex, half duplex fully adaptive
Protocol: IEEE 802.3, IEEE 802.1Q ((VLAN) ye kony
MAC Address Table: A lëu ba 4096 MAC Addresses ŋic
Fizikal Interface: RJ45 Seat Support AUTO-MDIX (Crossline Direct Line Adaptive)
◆ Data Interface
Data interface: RS-232, RS-422, RS-485, Manchester, TTL
Data format: NRZ, Manchester, Bi-phase
Lëk: 110bps-115.200Kbps
Terminal: RJ45
◆ Audio Interface
Signal level 0.5-4Vp-p
Input/output impedance 600Ω (non-balanced wala balanced)
Bandwidth 20Hz-20KHz
Harmonic distortion <1%
Audio A/D 24bit
Signal noise ratio (SNR): > 85dB
Terminal RCA
◆ Switch volume interface
Waktu ye yɛl <0.5ms
Signal switch 30VDC/0.5A
◆ Optik
Voltage: 75V
Dɔɔr: 25Hz
Wave length: 1470, 1490, 1510, 1530, 1550, 1570, 1590 ku 1610nm
Fibre optique: Single mode 9/125um
Optical interface: FC, SC, ST
Fiber optic transfer distance is limited to optical path loss and additional loss caused by connecting terminals, connectors, and plug plates. Fiber optic transfer distance is limited to optical path loss and additional loss caused by connecting terminals, connectors, and plug plates. Fiber optic transfer distance is limited to optical path loss and additional loss caused by connecting terminals, connectors, and plug plate A lëu bï tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ
◆ Elektrik ku mekanik
Voltage: AC165V ~ 265V; DC –48V; DC +24V
Kuɛl: ≤75W
Wɛ̈ɛ̈r dɔ̈ŋ: 186 (dɔ̈ŋ) * 138 (dɔ̈ŋ) * 31 (dɔ̈ŋ)
Kɔɔr: 1kg
◆ Luɔi luɔi
Tɛmɛ tɛmɛ: -10 ℃ ~ 50 ℃
Luɔi: 5% ~ 95% (No condensation)
Tɛmɛ tɛmɛ: -40 ℃ ~ 80 ℃
Kuen ye tɔ̈ɔ̈u: 5% ~ 95% (cïn condensation)